Extreme Networks ExtremeWare - Show Version

show version
ExtremeWare Software 7.3.0 Command Reference Guide 743
show version
show version {detail}
Description
Displays the hardware serial numbers and versions, and software versions currently running on the
switch, and (if applicable) the modules.
Syntax Description
Default
N/A.
Usage Guidelines
On chassis-based switches, displays the switch serial number and version numbers of MSM modules
(BlackDiamond switch) and I/O modules (BlackDiamond and Alpine switches).
For ARM, ATM, MPLS or PoS modules, displays information that includes data about the ARM, ATM,
MPLS or PoS module and the BootROM version of the ARM, ATM, MPLS or PoS module.
The following is an example of the type of information displayed when you execute the show version
command:
• System Serial Number—A collection of numbers and letters that make up the serial number of the
switch.
• CPU Serial Number—A collection of numbers and letters that make up the serial number of the CPU
running in the switch. A rev number may also be listed.
• Image—The ExtremeWare software version currently running on the switch. If you have two
software images downloaded on the switch, only the currently running ExtremeWare version
information is displayed. The information displayed includes the version number, build number, and
the software build date.
• BootROM—The BootROM version currently running on the switch.
If you use the detail option (supported in ExtremeWare version 6.2.1 or later) you may also see the
following:
• Board/Chassis/Platform Name—The name of the system or module, inserted before the Serial
Number in the display.
Depending on the model of your switch, the software running on your switch, and whether you have a
stackable or modular switch, different version information may be displayed.
For ARM, ATM, MPLS or PoS modules, the command also shows the software version running on the
module.
detail Specifies display of slot board name and chassis or platform name.