744 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
Example
The following command displays the hardware and software versions currently running on the switch:
show version
On a stackable switch, this command produces output similar to the following:
System Serial Number: 800078-11-0035M02442
CPU Serial Number: 700027-11 0034M-01445 CPLD Rev 04
Daughtercard Serial Number: 703015-02 0029M-02701 CPLD Rev ÿ
Image : Extremeware Version 6.2.0 (Build 60) by Release_Master 09/21/0120:53:17
On a BlackDiamond switch, this command produces output similar to the following:
Chassis: 801000-07-9946F00987
MSM A :
MSM B : 701021-08-0023F25758
SLOT 1 : 701026-03-0003Y00043
SLOT 2 : 701024-04-9949Y00055
SLOT 3 : 701005-09-9946F25172
SLOT 4 :
SLOT 5 :
SLOT 6 : 701028-01-0004Y00038
SLOT 7 :
SLOT 8 :
Image : Extremeware Version 6.2.0 (Build 60) by Release_Master 09/21/0120:53:17
BootROM : 7.2
Using the
detail
option in the
show version
command produces output similar to the following on a
BlackDiamond switch:
Chassis : MSM64 801000-07-9946F00987
MSM A : MSM64i
MSM B : MSM64i 701021-08-0023F25758
SLOT 1 : F48Ti 701026-03-0003Y00043
SLOT 2 : G8Xi 701024-04-9949Y00055
SLOT 3 : F32T 701005-09-9946F25172
SLOT 4 : Empty
SLOT 5 : Empty
SLOT 6 : G8Ti 701028-01-0004Y00038
SLOT 7 : Empty
SLOT 8 : Empty
Image : Extremeware Version 6.2.1 (Build 18) by Release_Master 02/14/02 15:04:26
BootROM : 7.2
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.2.1 to support the
detail
option.
To Next Page
Loading...