configure ipxrip add vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1559
configure ipxrip add vlan
configure ipxrip add vlan [<vlan name> | all]
Description
Configures one or all IPX VLANs to run IPX/RIP.
Syntax Description
Default
IPX/RIP is enabled by default when you configure the IPX VLAN.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command configures IPX VLAN
backbone
to run IPX/RP:
configure ipxrip add vlan backbone
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
To Next Page
Loading...