1470 ExtremeWare Software 7.3.0 Command Reference Guide
BGP Commands
enable bgp neighbor soft-in-reset
enable bgp neighbor [all | <ip address>] soft-in-reset
Description
Enables the soft input reset feature.
Syntax Description
Default
Disabled.
Usage Guidelines
Disabling the soft input reset feature can potentially limit the amount of system memory consumed by
the RIB-in.
Example
The following command enables the soft recognition feature:
enable bgp neighbor 192.168.1.17 soft-in-reset
History
This command was available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
all Specifies all neighbors.
ip address Specifies an IP address.
To Next Page
Loading...