show esrp-aware-ports
ExtremeWare Software 7.3.0 Command Reference Guide 1121
show esrp-aware-ports
show esrp-aware-ports {vlan <vlan name>}
Description
Displays the ESRP-aware VLAN(s), the ESRP group(s), and the ESRP-aware port(s) that receive ESRP
PDUs.
Syntax Description
Default
N/A.
Usage Guidelines
To reduce the amount of traffic, you can select the ports that receive ESRP PDUs by configuring
selective forwarding on ESRP-aware VLANs. By configuring selective forwarding, you create a portlist
of the ESRP groups associated with an ESRP-aware VLAN, and that portlist is used for forwarding
ESRP PDUs on the relevant ports only. Use the
show esrp-aware-ports
command to view the ESRP
group portlist that forwards ESRP PDUs.
Example
The following command displays selective forwarding statistics:
show esrp-aware-ports
The
show esrp-aware-ports
command produces output similar to the following:
VLAN tt
--------
ESRP Group 0: 1:2 1:1
History
This command was first available in ExtremeWare 6.2.2b81.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...
Need help?
General
