unconfigure port aggregate-bandwidth
ExtremeWare Software 7.3.0 Command Reference Guide 309
unconfigure port aggregate-bandwidth
unconfigure port <portnumber> aggregate-bandwidth
Description
Restores the egress bandwidth of a particular port to 100%.
Syntax Description
Default
None.
Usage Guidelines
None.
Example
The following command restores the egress bandwidth of port 3 on slot 1 to 100%.
unconfigure port 1:3 aggregate-bandwidth
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
portnumber Specifies a port or slot and port.
To Next Page
Loading...