1330 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
delete ospf area
delete ospf area [<area identifier> | all]
Description
Deletes an OSPF area.
Syntax Description
Default
N/A.
Usage Guidelines
An OSPF area cannot be deleted if it has an associated interface.
Example
The following command deletes an OSPF area:
delete ospf area 1.2.3.4
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
area identifier Specifies an OSPF area.
all Specifies all areas.
To Next Page
Loading...