upload system-dump
ExtremeWare Software 7.3.0 Command Reference Guide 2235
upload system-dump
upload system-dump [<ip address>]
Description
This command transfers a system dump to an IP address.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not specify an IP address, the configured system-dump server IP address is used.
Example
The following command transfers a system dump to 10.10.10.1:
upload system-dump 10.10.10.1 3
History
This command was first available in ExtremeWare 6.2.2.
Platform Availability
This command is available on platforms with an Ethernet management port.
ip address Specifies the IP address to which to transfer a system dump.
To Next Page
Loading...