Extreme Networks ExtremeWare - Disable Access-List

disable access-list
ExtremeWare Software 7.3.0 Command Reference Guide 867
disable access-list
disable access-list <name> [counter | log]
Description
Disables message logging or the collection of access-list statistics.
Syntax Description
Default
Counting is ON, logging is OFF.
Usage Guidelines
None.
Example
The following command disables statistics collection for access list allow102:
disable access-list allow102 counter
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
name Specifies the name of the access list.
counter Specifies that access-list statistics collection should be disable.
log Specifies that message logging to the Syslog facility for each packet that
matches the access-list description should be disabled.