1588 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
enable type20 forwarding
enable type20 forwarding {vlan <vlan name>}
Description
Enables the forwarding of IPX type 20 packets.
Syntax Description
Default
Enabled.
Usage Guidelines
Type 20 packets are NetBIOS inside IPX.
Example
The following command enables the forwarding of IPX type 20 packets for VLAN
accounting
:
enable type20 forwarding vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...