1498 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
configure igmp snooping delete static router
configure igmp snooping vlan <vlan name> ports <portlist> delete static
router
Description
Removes the configuration that causes VLAN ports to forward the traffic from all multicast groups,
even if no IGMP joins have been received on the port.
Syntax Description
Default
None.
Usage Guidelines
Use this command to remove the static IGMP entry created with the following command:
configure igmp snooping vlan <vlan n
ame> ports <portlist> add static
router
Example
The following command removes the static IGMP entry that caused all multicast groups to be
forwarded to VLAN marketing on ports 2:1-2:4:
configure igmp snooping marketing ports 2:1-2:4 delete static router
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
To Next Page
Loading...
Need help?
General
