configure vlan name
ExtremeWare Software 7.3.0 Command Reference Guide 333
configure vlan name
configure vlan <old_name> name <new_name>
Description
Renames a previously configured VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
You cannot change the name of the default VLAN “Default”
Example
The following command renames VLAN vlan1 to engineering:
configure vlan vlan1 name engineering
History
This command was first available in ExtremeWare 4.1.
Platform Availability
This command is available on all platforms.
old_name Specifies the current (old) VLAN name.
new_name Specifies a new name for the VLAN.
To Next Page
Loading...