2204 ExtremeWare Software 7.3.0 Command Reference Guide
Troubleshooting Commands
configure system-dump timeout
configure system-dump timeout <seconds>
Description
Configures an optional timeout for the dump transfer.
Syntax Description
Default
The default is 0.
Usage Guidelines
The minimum non-zero value is 120 seconds. The minimum recommended value is 480 seconds.
Example
The following command configures the system dump timeout to 600 seconds:
configure system-dump timeout 600
History
This command was first available in ExtremeWare 6.2.2.
Platform Availability
This command is available on platforms with an Ethernet management port.
seconds Specifies a time in seconds for the system dump timeout.
To Next Page
Loading...