1798 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
configure mpls rsvp-te delete path
configure mpls rsvp-te delete path [<path_name> | all]
Description
Deletes an RSVP-TE path.
Syntax Description
Default
N/A.
Usage Guidelines
This command deletes a configured MPLS RSVP-TE routed path with the specified
<path_name>
. All
associated configuration information for
<path_name>
is deleted. A path cannot be deleted as long as
the
<path_name>
is associated with an LSP. If the
all
keyword is specified, all paths not associated with
an LSP are deleted.
Example
The following command deletes all RSVP-TE paths.
configure mpls rsvp-te delete path all
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
path_name Specifies the name of the path.
To Next Page
Loading...