Extreme Networks ExtremeWare User Manual

download image
ExtremeWare Software 7.3.0 Command Reference Guide 2117
download image
download image [<hostname> | <ipaddress>] [<filename> | all-images
<filename_prefix> {image-type [non-ssh | ssh]}] {primary | secondary}
{slot <slot>}
Description
Downloads a new version of the ExtremeWare software image.
Syntax Description
Default
Stores the downloaded image in the current location (the location used for the last reboot).
Usage Guidelines
Prior to downloading an image, you must place the new image in a file on a TFTP server on your
network. Unless you include a path with the filename, this command assumes that the file resides in the
same directory as the TFTP server itself.
The switch can store up to two images: a primary image and a secondary image. When you download a
new image, you must select into which image space (primary or secondary) you want the new image to
be placed. If no parameters are defined, the software image is saved to the selected image, that is, the
next boot-up image.
Use of the <hostname> parameter requires that DNS be enabled.
For ExtremeWare 7.1.0 and higher, the following features are available on the Alpine and BlackDiamond
chassis:
• You can update the operational images for all installed modules that run a software image. All of the
operational images files must be located in the same directory on the TFTP server and they must
have the same filename prefix.
• To update all of the images on the installed modules, use the all-images keyword.
hostname Specifies the hostname of the TFTP server from which the image should be
obtained.
ipaddress Specifies the IP address of TFTP server from which the image should be
obtained.
filename Specifies the filename of the new image.
filename_prefix Specifies that filename prefix of the new image.
non-ssh Specifies that the new image be downloaded without export-restricted security
features.
ssh Specifies that the new image be downloaded with export-restricted security
features.
primary Specifies that the new image should be stored as the primary image.
secondary Specifies that the new image should be stored as the secondary image.
slot Specifies that the new image should be downloaded to the module in the
specified slot.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English