1518 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
configure pim vlan trusted-gateway
configure pim vlan [<vlan name> | all] trusted-gateway [<access profile> |
none]
Description
Configures a trusted neighbor policy.
Syntax Description
Default
No access profile, so all gateways are trusted.
Usage Guidelines
Because PIM leverages the unicast routing capability that is already present in the switch, the access
policy capabilities are, by nature, different. When the PIM protocol is used for routing IP multicast
traffic, the switch can be configured to use an access profile to determine trusted PIM router neighbors
for the VLAN on the switch running PIM.
Example
The following command configures a trusted neighbor policy on the VLAN backbone:
configure pim vlan backbone trusted-gateway nointernet
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
access profile Specifies an access profile name.
none Specifies no access profile, so all gateways are trusted.
To Next Page
Loading...