disable mpls
ExtremeWare Software 7.3.0 Command Reference Guide 1823
disable mpls
disable mpls
Description
Disables MPLS on the switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
Disabling MPLS causes all LSPs to be released and all LDP neighbor sessions to be terminated.
Example
The following command globally disables MPLS on the switch:
disable mpls
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
To Next Page
Loading...