152 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 delete target-params
configure snmpv3 delete target-params [{{hex} <param name>} | all]
Description
Delete SNMPv3 target parameters.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete an entry in the SNMPv3 snmpTargetParamsTable. This table specifies the
message processing model, security level, security model, and the storage parameters for messages to
any target addresses associated with a particular parameter name.
Example
The following command deletes a target parameters entry named P1:
configure snmpv3 delete target-params P1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
param name Specifies the parameter name associated with the target.
To Next Page
Loading...
Need help?
General
