576 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
enable slb vip svcdown-reset
enable slb vip [all | <vip name>] svcdown-reset
Description
Enables svcdown-reset.
Syntax Description
Default
The svcdown-reset feature is disabled by default.
Usage Guidelines
The svcdown-reset feature configures the switch to send TCP RST packets to both the clients and the
virtual server if the virtual server fails a health-check.
To disable svcdown-reset, use the following command:
disable slb vip svcdown-reset
Example
The following command enables svcdown-reset for the virtual server “ftp_vip”:
enable slb vip ftp_vip svcdown-reset
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
all Specifies all virtual servers.
vip name Specifies a virtual server.
To Next Page
Loading...