show snmpv3 mib-view
ExtremeWare Software 7.3.0 Command Reference Guide 205
show snmpv3 mib-view
show snmpv3 mib-view {{hex} <view name> {subtree <object identifier>}}
Description
Displays a MIB view.
Syntax Description
Default
N/A.
Usage Guidelines
The
show snmpv3 mib-view
command displays a MIB view. If you do not specify a view name, the
command will display details for all the MIB views. If a subtree is not specified, then all subtrees
belonging to the view name will be displayed.
This command displays the SNMPv3 VACMViewsTreeFamilyTable.
Example
The following command displays all the view details.·
show snmpv3 mib-view
The following command displays a view with the view name Roview and subtree 1.3.6.1.2.1.1:
show snmpv3 mib-view Roview subtree 1.3.6.1.2.1.1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
view name Specifies the name of the MIB view to display.
subtree Specifies the object identifier of the view to display.
To Next Page
Loading...