Extreme Networks ExtremeWare - Configure Slb Vip Client-Persistence-Timeout

configure slb vip client-persistence-timeout
ExtremeWare Software 7.3.0 Command Reference Guide 507
configure slb vip client-persistence-timeout
configure slb vip [<vip name> | all] client-persistence-timeout <seconds>
Description
Configures the client persistence timeout value.
Syntax Description
Default
The default client-persistence-timeout is 3600.
Usage Guidelines
Extreme Networks recommends that you specify a short client persistence timeout, because longer
timeout values consume more memory.
Example
The following command configures the virtual server “ftp” with a client persistence timeout of 3000
seconds:
configure slb vip ftp client-persistence-timeout 3000
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
vip name Specifies a virtual server.
all Specifies all virtual servers.
client-persistence-timeout Specifies the persistence timeout. The range is 1 to 999,999,999.