unconfigure ipxsap
ExtremeWare Software 7.3.0 Command Reference Guide 1597
unconfigure ipxsap
unconfigure ipxsap {vlan <vlan name>}
Description
Resets the IPX/SAP settings on one or all VLANs to the default.
Syntax Description
Default
N/A.
Usage Guidelines
Removes import and export filters, and resets the MTU size, update interval, and inter-packet delay.
Example
The following command resets the IPX/SAP settings on VLAN
backbone
to the defaults:
unconfigure ipxsap vlan backbone
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...