1718 ExtremeWare Software 7.3.0 Command Reference Guide
T1, E1, and T3 WAN Commands
configure vlan add multilink
configure vlan <vlan name> add multilink <groupname>
Description
Adds an MLPPP multilink group to a VLAN
.
Syntax Description
Default
N/A.
Usage Guidelines
Add an MLPPP group to a VLAN to transport traffic across the link. A multilink group configured for
BCP encapsulation can transport more than one VLAN’s traffic (see
“configure ppp user” on page 1714
for details).
Example
The following command adds the multilink group marmots to the VLAN corporate:
configure corporate add ml_remote
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
vlan Specifies a previously created VLAN.
groupname Specifies a previously created multilink group.
To Next Page
Loading...
Need help?
General
