1452 ExtremeWare Software 7.3.0 Command Reference Guide
BGP Commands
disable bgp aggregation
disable bgp aggregation
Description
Disables BGP route aggregation.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
Route aggregation is the process of combining the characteristics of several routes so that they are
advertised as a single route. Aggregation reduces the amount of information that a BGP speaker must
store and exchange with other BGP speakers. Reducing the information that is stored and exchanged
also reduces the size of the routing table.
Use this command to disable BGP route aggregation.
Example
The following command disables BGP route aggregation:
disable bgp aggregation
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
