Extreme Networks ExtremeWare - Show Wireless Ap-Scan Results Mac_Address

show wireless ap-scan results mac_address
ExtremeWare Software 7.3.0 Command Reference Guide 2071
show wireless ap-scan results mac_address
show wireless ap-scan results <mac_address>
Description
Displays information about the access point (AP) MAC-address that is entered.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command displays information about the AP MAC-address entered:
show wireless ap-scan results 00:00:00:00:00:a
The results of the command are similar to:
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
mac_address Specifies the MAC-address.