Extreme Networks ExtremeWare - Unconfigure Diffserv Examination Ports

unconfigure diffserv examination ports
ExtremeWare Software 7.3.0 Command Reference Guide 415
unconfigure diffserv examination ports
unconfigure diffserv examination ports [<portlist> | all]
Description
Removes the Diffserv examination code point from a port.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command removes Diffserv code-point examination from ports 5-8:
unconfigure diffserv examination ports 5-8
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
portlist Specifies a list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5,
2:6-2:8.
all Specifies that Diffserv examination code points should be removed from all
ports.