772 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure auth mgmt-access radius-accounting
configure auth mgmt-access radius-accounting primary <ipaddress>
[secondary <ipaddress>]
Description
Configures RADIUS accounting servers for accounting management sessions.
Syntax Description
Default
N/A.
Usage Guidelines
The RADIUS server must be configured before this command is used. The command will fail if the
given primary and secondary RADIUS servers are not configured or if RADIUS authentication is not
configured for management sessions.
Example
configure auth mgmt-access radius-accounting primary 192.168.14.12 secondary
192.168.14.55
History
This command was first available in ExtremeWare 7.3.
Platform Availability
This command is available on all platforms.
ipaddress Specifies the IP addresses of the primary or secondary servers.
To Next Page
Loading...