enable slb global synguard
ExtremeWare Software 7.3.0 Command Reference Guide 557
enable slb global synguard
enable slb global synguard
Description
Enables the TCP SYN-guard feature.
Syntax Description
This command has no arguments or variables.
Default
SYN-guard is disabled by default.
Usage Guidelines
To disable SYN-guard, use the following command:
disable slb global synguard
Example
The following command enables SYN-guard:
enable slb global synguard
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...