Extreme Networks ExtremeWare - Show Slb Node

show slb node
ExtremeWare Software 7.3.0 Command Reference Guide 589
show slb node
show slb node {<ip address> [ftp | http | https | imap4 | ldap | nntp |
pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or UDP
port number>]}
Description
Displays node configuration and status.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not specify a node, status for all nodes is displayed.
Example
The following command displays the current node configuration and statistics for all nodes:
show slb node
ip address Specifies an IP address.
ftp Specifies an FTP node.
http Specifies an HTTP node.
https Specifies an HTTPS node.
imap4 Specifies an IMAP4 node.
ldap Specifies an LDAP node.
nntp Specifies an NNTP node.
pop3 Specifies a POP3 node.
smtp Specifies an SMTP node.
socks Specifies a SOCKS node.
telnet Specifies a telnet node.
tftp Specifies a TFTP node.
web Specifies a Web node.
wildcard Specifies any port associated with a wildcard server.
www Specifies a www node
TCP or UDP port number Specifies a TCP or UDP port for the node.