1434 ExtremeWare Software 7.3.0 Command Reference Guide
BGP Commands
configure bgp peer-group no-dampening
configure bgp peer-group <name> no-dampening
Description
Configures no route flap dampening for a BGP peer group (disables route flap dampening).
Syntax Description
Default
This feature is disabled by default.
Usage Guidelines
Use the following command to enable route flap dampening for a BGP peer-group:
configure bgp peer-group <name> dampening
{{<half-life> {<reuse> <suppress>
<max-suppress> }} | {route-map <route map>}}
Example
The following command disables route flap dampening to the BGP peer group outer:
configure bgp peer-group no-dampening
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
name Specifies a BGP peer group.
To Next Page
Loading...