disable isis originate-default
ExtremeWare Software 7.3.0 Command Reference Guide 1335
disable isis originate-default
disable isis [level-2 | area <isis area identifier>] originate-default
Description
Disables the origination of an IS-IS default route from a system into the level 1 area or level 2
subdomain.
Syntax Description
Default
The default setting is disabled.
Usage Guidelines
None.
Example
The following command disables the origination of an IS-IS default route for the level 2 subdomain:
disable isis level-2 originate-default
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
level-2 Specifies the level 2 subdomain.
area identifier Specifies a level 1 area identifier.
To Next Page
Loading...