disable snmp dot1dTpFdbTable
ExtremeWare Software 7.3.0 Command Reference Guide 163
disable snmp dot1dTpFdbTable
disable snmp dot1dTpFdbTable
Description
Disables SNMP GetNext responses for the dot1dTpFdbTable in the BRIDGE-MIB.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
SNMP Get responses are not affected by this command.
To view the configuration of the dot1dTpFdb table on the switch, use the
show management
command.
The
show management
command displays information about the switch including the enable/disable
state the dot1dTpFdb table.
To restore defaults to all SNMP-related entries, including the SNMP parameters modified using the
disable snmp dot1dTpFdbTable
command, use the
unconfigure management
command.
Example
The following command disables the dot1dTPFdb table:
disable snmp dot1dTpFdbTable
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...