enable esrp vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1111
enable esrp vlan
enable esrp vlan <vlan name>
Description
Enables ESRP on a VLAN.
Syntax Description
Default
Disabled.
Usage Guidelines
EDP must be enabled on all ports participating in ESRP.
ESRP cannot be enabled on the VLAN default.
Example
The following command enables ESRP on the VLAN esrp-1:
enable esrp vlan esrp-1
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...