Extreme Networks ExtremeWare - Unconfigure Flowstats Ports

unconfigure flowstats ports
ExtremeWare Software 7.3.0 Command Reference Guide 747
unconfigure flowstats ports
unconfigure flowstats ports [<portlist> | all]
Description
Resets the flow statistics configuration parameters for the specified ports to their default values.
Syntax Description
Default
N/A.
Usage Guidelines
This command does not affect the enabled or disabled status of flow collection on these ports, nor does
it affect the configured export destinations.
Example
The following command resets the flow statistics configuration parameters for port 1 of slot 8 to their
default values:
unconfigure flowstats ports 8:1
History
This command was first available in ExtremeWare 6.1.5b20 for the PoS module
This command was made available in ExtremeWare 6.2 for all “i” series platforms.
Platform Availability
This command is available on all platforms.
portlist Specifies a set of ports or slots and ports that should be reset. May be in the
form 1, 2, 3-5, 2:5, 2:6-2:8.
all Specifies that all ports or slots and ports should be reset.