configure ospf delete virtual-link
ExtremeWare Software 7.3.0 Command Reference Guide 1303
configure ospf delete virtual-link
configure ospf delete virtual-link <routerid> <area identifier>
Description
Removes a virtual link.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes a virtual link:
configure ospf delete virtual-link 10.1.2.1 10.1.0.0
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
routerid Specifies a router interface number.
area identifier Specifies an OSPF area.
To Next Page
Loading...