configure irdp
ExtremeWare Software 7.3.0 Command Reference Guide 1175
configure irdp
configure irdp [multicast | broadcast]
Description
Configures the destination address of the router advertisement messages.
Syntax Description
Default
Multicast (224.0.0.1).
Usage Guidelines
None.
Example
The following command sets the address of the router advertiser messages to multicast:
configure irdp multicast
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
multicast Specifies multicast setting.
broadcast Specifies broadcast setting.
To Next Page
Loading...