1550 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
show mroute
show mroute
Description
Displays static multicast route configuration information.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This command displays the static multicast table entries in the order defined with the
configure
mroute add
command.
Example
The following command displays static multicast route configuration information:
show mroute
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...