enable isis
ExtremeWare Software 7.3.0 Command Reference Guide 1349
enable isis
enable isis
Description
Enables IS-IS routing.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
To enable IS-IS routing, use the following command:
enable isis
Example
The following command enables IS-IS routing:
enable isis
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...