Extreme Networks ExtremeWare - Show Igmp Snooping Static Group

1546 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
show igmp snooping static group
show igmp snooping {vlan <vlan name>} static group
Description
Displays static IGMP snooping entries.
Syntax Description
Default
None.
Usage Guidelines
Use this command to display IGMP snooping filters configured on the specified VLAN. When no
VLAN is specified, all the filters will be displayed.
Example
To display the IGMP snooping static groups configured on VLAN vlan101, use the following command:
show igmp snooping vlan101 static group
The output of the command will be similar to the following:
VLAN vlan101 (4094)
Group Port Flags
239.1.1.2 29 s-
239.1.1.2 30 s-
239.1.1.2 31 sa
239.1.1.2 32 s-
239.1.1.2 34 s-
Total number of configured static IGMP groups = 5
Flags: (s) Static, (a) Active
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.