Extreme Networks ExtremeWare User Manual

664 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
configure transceiver-test threshold
configure transceiver-test threshold <1-8>
Description
Configures the number of errors the switch accepts before an action is taken.
Syntax Description
Default
3 errors.
Usage Guidelines
Use this feature when the switch can be brought off-line.
Extreme Networks does not recommend changing the default transceiver test threshold parameter. The
default parameter is adequate for most networks.
Example
The following command configures the switch to accept 4 errors before an action is taken:
configure transceiver-test threshold 4
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on modular switches only.
threshold Specifies the number of errors. The range is 1 to 8 errors.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English