enable ipxrip
ExtremeWare Software 7.3.0 Command Reference Guide 1585
enable ipxrip
enable ipxrip
Description
Enables IPX/RIP on the router.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command enables IPX/RIP on the router:
enable ipxrip
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
To Next Page
Loading...