Extreme Networks ExtremeWare User Manual

2164 ExtremeWare Software 7.3.0 Command Reference Guide
Troubleshooting Commands
configure debug-trace ipxsap-entry
configure debug-trace ipxsap-entry <debug level>
Description
This command is not currently supported.
Syntax Description
Default
The default level is 0.
Usage Guidelines
This command is not currently supported.
Example
This command is not currently supported.
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
debug level Specifies a debug level:
0 — Not currently supported.
1 — Not currently supported.
2 — Not currently supported.
3 — Not currently supported.
4 — Not currently supported.
5 — Not currently supported.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English