926 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
show cpu-dos-protect
show cpu-dos-protect
Description
Displays the status of denial of service protection.
Syntax Description
There are no arguments or variables for this command.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays the status of denial of service protection.
show cpu-dos-protect
Following is the output from this command:
Denial-of-service protection to CPU is ENABLED
Notice level: 4000 new packets/second (level for logging)
Alert level: 4000 new packets/second (level for ACL creation)
Filter types: destination
ACL timeout: 15 seconds
ACL rule precedence: 10
Messages are ON
Trusted Ports: none
ACL is active ports 48 to 192.168.3.1 proto all precedence 10
ACL should expire in 13 seconds
History
This command was first available in ExtremeWare 6.2.2
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
