configure auth netlogin tacacs
ExtremeWare Software 7.3.0 Command Reference Guide 777
configure auth netlogin tacacs
configure auth netlogin tacacs primary <ipaddres> [secondary <ipaddress>]
Description
Configures authentication of netlogin sessions through TACACS servers.
Syntax Description
Default
N/A.
Usage Guidelines
This command will fail if the given primary and secondary TACACS servers are not configured.
Example
configure auth netlogin tacacs primary 192.168.14.12 secondary 192.168.14.55
History
This command was first available in ExtremeWare 7.3.
Platform Availability
This command is available on all platforms.
ipaddress Specifies the IP addresses of the primary and secondary servers.
To Next Page
Loading...