configure sntp-client update-interval
ExtremeWare Software 7.3.0 Command Reference Guide 159
configure sntp-client update-interval
configure sntp-client update-interval <seconds>
Description
Configures the interval between polls for time information from SNTP servers.
Syntax Description
Default
64 seconds.
Usage Guidelines
None.
Example
The following command configures the interval timer:
configure sntp-client update-interval 30
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
seconds Specifies an interval in seconds.
To Next Page
Loading...