show gvrp
ExtremeWare Software 7.3.0 Command Reference Guide 345
show gvrp
show gvrp
Description
Displays the current configuration and status of GVRP.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
GVRP is not supported in ExtremeWare version 6.1 or later.
Example
The following shows results of this command:
GVRP running (866422): JoinTime 20 LeaveTime 200 LeaveAllTime 1000 cs
GVRP transmit 0 receive 0 tx errors 0 rx errors 0 int errors 0
Enabled for Tx/Rx on ports: 123456789
10111213141516171819
20212223242526272829
303132
VLAN/Ports (t=static tagged, u=static untag, G=GVRP tagged, g=GVRP untag)
Default (Tag 1)
uuuuuuuuuu..uuu..uuuuuuuuuuuuuuu
Mgmt (Tag 4094)
................................
nat (Tag 4093)
................................
History
This command was first available in ExtremeWare 2.0.
This command exists but is not supported in ExtremeWare version 6.1 or later.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
