Extreme Networks ExtremeWare User Manual

show mpls label
ExtremeWare Software 7.3.0 Command Reference Guide 1837
show mpls label
show mpls label {summary {detail} | <label_number> {detail} | host
<ipaddress> {detail} | prefix <ipaddress/masklength> {detail} | rsvp-te
<ipaddress> {detail}}
Description
Displays information from the Incoming Label Map (ILM), used when forwarding packets that arrive as
labeled MPLS packets.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays information from the Incoming Label Map (ILM), which is used when
forwarding packets that arrive labeled as MPLS packets.
When the label_number parameter is omitted, summary information is displayed for all incoming label
assignments that have been made by the switch. When the
label_number is specified, summary
information is displayed for the label.
Use the fec keyword to display the label associated with an FEC. You can specify both host and prefix
FEC types. The
summary keyword displays the number of labels allocated from each label range
partition.
By default, the information displayed includes:
• Next hop IP address
• Outgoing and incoming labels
• Interface number of the outgoing VLAN
• FEC associated with the incoming label
If the detail keyword is specified, the following additional information is displayed:
• Outgoing port number
• Counts of packets and bytes that have been received with the incoming label
summary Specifies the number of labels allocated form each label range partition.
detail Specifies to display the information in detailed format.
label_number Specifies an MPLS label number.
host <ipaddress> Specifies a particular host FEC type.
prefix Specifies a particular prefix FEC type.
rsvp-te Specifies only RSVP-TE assigned labels

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English