1838 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
• Counts of packets and bytes that have been transmitted with the outgoing label
• LSP type
This command also displays information from the Incoming Label Map (ILM) for RSVP-TE LSPs.
Example
The following command displays the summary information from the Incoming Label Map:
show mpls label summary
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
To Next Page
Loading...