Extreme Networks ExtremeWare - Configure Slb Gogo-Mode Tcp-Port-Check Add

configure slb gogo-mode tcp-port-check add
ExtremeWare Software 7.3.0 Command Reference Guide 485
configure slb gogo-mode tcp-port-check add
configure slb gogo-mode <port number> tcp-port-check add [ftp | http |
https | imap4 | ldap | nntp | pop3 | smtp | socks | telnet | tftp | web |
www | <TCP port number>]
Description
Adds the specified layer 4 port.
Syntax Description
Default
N/A.
Usage Guidelines
This command adds the port to the specified TCP-port-check in the specified GoGo mode group. You
can only add a single port with each command; to add multiple ports, you must enter multiple
commands.
Example
The following command adds FTP as a GoGo mode TCP-port-check for the group with port 29 as the
master port:
configure slb gogo-mode 29 tcp-port-check add ftp
History
This command was first available in ExtremeWare 6.1.5.
port number Specifies the GoGo mode master port.
ftp Specifies the FTP TCP-port-check.
http Specifies the HTTP TCP-port-check.
https Specifies the HTTPS TCP-port-check.
imap4 Specifies the IMAP4 TCP-port-check.
ldap Specifies the LDAP TCP-port-check.
nntp Specifies the NNTP TCP-port-check.
pop3 Specifies the POP3 TCP-port-check.
smtp Specifies the SMTP TCP-port-check.
socks Specifies the SOCKS TCP-port-check.
telnet Specifies the telnet TCP-port-check.
tftp Specifies the TFTP TCP-port-check.
web Specifies the Web TCP-port-check.
www Specifies the www TCP-port-check.
TCP port number Specifies a TCP port for the TCP-port-check.