show wireless ports interface status
ExtremeWare Software 7.3.0 Command Reference Guide 2103
show wireless ports interface status
show wireless ports [<portlist> | all] interface [1 |2] status
Description
Displays the current state of the selected port and interface.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to examine RF profiles on a per wireless port basis. This command allows you to
view the log of a specific port or ports, filtering out the switch log.
Examples
The following example displays the status for wireless ports 3 on interface 1:
show wireless ports 3 interface 1 status
The output of the command is similar to:
Intf St. Tx Rate Power Ch ESS Max Cl. Last State Change
-------------------------------------------------------------------------------
3:1 EN 54 FULL 52 fz-wpa-psk-aes 100 Mon Jul 26 17:15:11 2004
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
To Next Page
Loading...
Need help?
General
